Trigger Sprayer: Complete Manufacturing & Sourcing Guide
Complete B2B sourcing guide for trigger sprayers: types, materials, sizes (24/410, 28/410, 28/412), MOQ from 10,000 units, lead times 20–30 days. Factory-direct data from SUNSHINE (Ningbo Shaoshuai Plastic).
By Linda Chen, Senior Product Engineer at Ningbo Shaoshuai Plastic Industry Co., Ltd. | 12 years in cosmetic packaging & industrial spray hardware manufacturing
What Is a Trigger Sprayer?
A trigger sprayer is a manually actuated pump dispenser that converts liquid into a controlled spray pattern through a lever-operated piston mechanism. Unlike aerosol cans—which rely on pressurized propellants—trigger sprayers create pressure mechanically each time the user squeezes the trigger, making them refillable, non-pressurized, and compliant with most international shipping and retail regulations.
For B2B buyers, trigger sprayers represent one of the highest-volume commodity components in the packaging supply chain. A single household cleaning brand may require 500,000+ units per month; a salon chain sourcing hair-care sprayers might start with 10,000 units and scale quarterly. Getting the specification right—thread size, spray pattern, material, closure—directly determines product performance, return rate, and brand perception.
This guide is written from a manufacturing perspective. Every specification, MOQ figure, and lead time below comes from our live production data. Where we reference competitor or industry-standard benchmarks, we say so explicitly.
How a Trigger Sprayer Works: Mechanism & Key Components
Understanding the internal mechanism helps buyers specify the right product and identify failure modes before they reach the market.
Core Components
| Component | Material (standard) | Function | Failure mode if wrong spec |
|---|---|---|---|
| Trigger lever | PP (polypropylene) | Converts finger squeeze into piston stroke | Cracking under repeated load if using recycled PP |
| Piston & cylinder | PP or PP/PE | Creates suction stroke to draw liquid, pressure stroke to spray | Leakage if piston diameter tolerance > ±0.1 mm |
| Ball valve / dip tube | PP, LDPE tube | One-way valve prevents backflow; dip tube reaches bottle base | Siphon failure (won’t pull up liquid) if tube kinked |
| Nozzle / orifice insert | PP, POM | Shapes liquid into mist, stream, or foam pattern | Drip instead of mist if orifice diameter out of spec |
| Shroud / hood | PP | Ergonomic grip surface; branding area | Cosmetic only—cracking if UV-exposed without UV-stabilized resin |
| Closure / cap thread | PP | Attaches to bottle neck (28/410, 24/410, etc.) | Cross-threading, leakage if thread tolerance loose |
The Spray Cycle
- Squeeze (pressure stroke): Trigger compresses spring; piston moves forward, pressurizing liquid in cylinder. Ball valve at base closes.
- Nozzle discharge: Pressure exceeds nozzle back-pressure threshold (~2–4 bar for mist), liquid exits as fine droplets.
- Release (suction stroke): Spring pushes trigger back; piston retracts, creating negative pressure. Base ball valve opens, drawing fresh liquid from dip tube.
- Ready state: Cylinder refilled; system primed for next actuation.
A standard polypropylene trigger sprayer requires 4–7 priming strokes from empty before achieving consistent spray. “Non-spill” designs (see SUNSHINE WP-1234) incorporate a secondary valve that holds residual liquid in the cylinder between strokes, reducing drip and priming frequency.
Types of Trigger Sprayers: A Buyer’s Classification
The market segments trigger sprayers into four functional categories. Each has distinct mechanism requirements, typical applications, and pricing tiers.
| Type | Spray Pattern | Key Mechanism Feature | Typical Applications | SUNSHINE SKU Reference |
|---|---|---|---|---|
| Standard / Stream | Focused stream or adjustable | Larger orifice, lower back-pressure | Garden watering, targeted cleaning | WP-1242, WP-1246 |
| Fine Mist | Micro-droplet mist (<50 µm) | Swirl chamber + tight orifice | Hair styling, cosmetics, sanitiser | WP-1178, WP-1237 |
| Continuous Spray | Sustained mist on single pull | Dual-ball valve + reservoir chamber | Salon, large-area misting, plants | WP-1172 |
| Mini / Compact | Mist or stream (reduced volume) | Shorter stroke, smaller cylinder | Travel, personal care, sampling | WP-1231, WP-1234, WP-1175 |
Standard vs. Fine Mist: When the Difference Matters
Fine mist trigger sprayers use a swirl chamber upstream of the orifice—liquid enters tangentially, rotates at high velocity, and exits as uniform micro-droplets. This adds ~$0.03–0.08 USD per unit to tooling cost but is non-negotiable for:
- Hair care products (even water distribution on hair shaft)
- Disinfectants requiring surface coverage >90% per stroke
- Cosmetic sprays where visible droplets cause consumer complaints
Continuous Spray: The Salon Standard
Our WP-1172 200ml continuous spray bottle sustains mist throughout the full trigger depression and release cycle—not just at the pressure peak. This uses a dual-chamber design where a reservoir holds pre-pressurized liquid. For high-volume salon use (150+ strokes per stylist per day), continuous spray reduces hand fatigue significantly compared to standard actuations.
Materials & Construction: What the Resin Grade Actually Means
Resin selection drives chemical compatibility, shelf life, and unit economics. The cosmetic packaging industry has largely standardized on PP—but the grade, MFI (melt flow index), and any blending matter enormously.
| Material | SKUs | Advantages | Limitations | Typical Liquid Compatibility |
|---|---|---|---|---|
| PP (Polypropylene) | WP-1242, WP-1178, WP-1244, WP-1231, WP-1237, WP-1234, WP-1246, WP-1175 | Chemical resistant, lightweight (0.9 g/cm³), FDA-compliant grades available, recyclable (#5) | Brittle below −10°C; limited UV stability without additives | Water, dilute acids/alkalis, alcohols up to 70%, most surfactants |
| PP/PE Blend | WP-1239 | Improved impact resistance vs. virgin PP; maintains chemical resistance | Slightly lower clarity; mixed-resin recycling complexity | Same as PP; added flexibility suits strong trigger designs |
| PP + PET components | WP-880 | PET nozzle inserts: superior dimensional stability, optical clarity | Multi-material disassembly required for recycling | Broad compatibility; PET preferred for aggressive solvents |
Material Certification: What to Demand from Your Supplier
For products contacting food-adjacent surfaces, human skin, or mucous membranes, request:
- FDA 21 CFR 177.1520 compliance letter (for PP components)
- EU Regulation 10/2011 migration test report (for EU market)
- REACH SVHC declaration (relevant for Germany, Netherlands distribution)
- Resin lot traceability to ISO 9001-documented incoming QC record
At SUNSHINE, all virgin PP used in our trigger sprayer lines carries supplier certificates referenced to individual production batches. We retain these records for 3 years per ISO 9001 documentation requirements.
Sizes & Bottle Compatibility: Threading Standards Explained
Thread size is the single most common specification error in trigger sprayer procurement. Ordering 28/410 sprayers for 24/410 bottles means 100% of the delivery is unusable. Here is what the numbers mean:
Reading the Thread Code
The code format is [Diameter]mm / [Thread count]:
- 24 = 24mm outer diameter of bottle neck opening
- 28 = 28mm outer diameter of bottle neck opening
- 410 = GPI (Glass Packaging Institute) thread finish standard, 4 starts, 10 pitch
- 412 = alternative 12-pitch variant (finer thread, typically used in cosmetics)
- 400 = 4-start, 0-lead finish (less common; found in older cleaning product lines)
| Thread Size | Inner Diameter (approx.) | Typical Bottle Volume | Industry Sector | SUNSHINE SKUs |
|---|---|---|---|---|
| 24/410 | 20.5 mm | 50–250 ml | Personal care, cosmetics, travel | WP-1178, WP-880, WP-1234 |
| 28/400 | 24.0 mm | 100–500 ml | Household cleaning (legacy) | WP-1244 |
| 28/410 | 24.0 mm | 200–1000 ml | Cleaning, garden, salon — dominant standard | WP-1172, WP-1242, WP-1244, WP-1231, WP-1239, WP-880, WP-1175, WP-1234, WP-1237, WP-1246 |
| 28/412 | 24.0 mm | 200–750 ml | Cosmetics, premium personal care | WP-1172, WP-1178 |
Critical Sourcing Rule: Measure Your Existing Bottles First
If you are sourcing sprayer heads to fit existing stock, use a thread gauge to verify the GPI finish before ordering. The 28/400 and 28/410 share the same neck diameter but have incompatible thread profiles—a 28/410 sprayer will seat loosely on a 28/400 bottle and leak under light pressure. We provide free thread-compatibility samples upon request for orders with an established bottle partner.
Application Selection Guide: Which Trigger Sprayer for Which Use Case
The right sprayer is determined by three factors: the liquid formulation, the end-user behavior (frequency, ergonomics), and the regulatory environment of the target market. Below is a decision matrix built from the application data across our 11 SKUs.
| Application | Recommended Spray Pattern | Minimum Material Requirement | Thread Size Recommendation | SUNSHINE Product |
|---|---|---|---|---|
| Hair styling / salon use | Fine mist or continuous mist | PP (virgin, food-contact grade) | 24/410 or 28/412 | WP-1178, WP-1172 |
| Kitchen cleaning | Adjustable (mist + stream) | PP (chemical resistant) | 28/410 | WP-1244, WP-1246, WP-1234 |
| Hand washing / personal care | Fine mist | PP, FDA-compliant grade | 24/410 or 28/410 | WP-1178, WP-1246, WP-1242 |
| Disinfectant / sanitiser | Fine mist (≥85% surface coverage) | PP with alcohol resistance tested | 28/410 | WP-1244, WP-1231, WP-1239 |
| Garden watering | Stream or fan spray | PP or PP/PE (UV-stabilized) | 28/410 | WP-1242, WP-1239 |
| Car washing / auto detailing | Mist spray (even coverage) | PP (solvent-resistant) | 28/410 | WP-1237 |
| Cosmetic / travel | Fine mist (compact body) | PP (odor-neutral, cosmetic grade) | 28/410 or 28/412 | WP-1175, WP-1231 |
| Industrial B2B (high volume) | Stream or adjustable | PP/PET (precision nozzle) | 24/410 or 28/410 | WP-880 |
Liquid Compatibility Check Before You Order
Always test your formulation against the sprayer before committing to a production run. Common compatibility issues:
- Ethanol >70%: Can cause PP spring-retainer to swell over time; specify PP with HDPE spring housing or use stainless-spring variants.
- Essential oils (undiluted): Terpenoids can permeate PP and cause crazing; request immersion test at 40°C for 72 hours.
- Bleach / sodium hypochlorite >3%: Accelerates PP degradation; recommend PP with antioxidant additive package—confirm with supplier resin spec sheet.
Customization Options: From Standard to Private Label
Trigger sprayers are one of the most customizable components in the packaging category. SUNSHINE’s standard line offers 6 closure finish types and full OEM/ODM capability. Below is a structured overview of what is adjustable and at what cost impact.
| Closure Type | Description | Minimum MOQ | Lead Time Impact | Best For |
|---|---|---|---|---|
| Smooth | Plain, clean surface—no texture | 10,000 units | Standard (20–25 days) | Minimalist, premium cosmetic brands |
| Ribbed | Vertical grooves for grip | 10,000 units | Standard (20–25 days) | Cleaning products, garden, industrial |
| Aluminum | Metal sleeve over PP body | 10,000 units | +5–7 days (metal sourcing) | Premium personal care, gifting |
| UV Coating | High-gloss UV lacquer finish | 10,000 units | +3–5 days (coating run) | Luxury skincare, retail shelf differentiation |
| Water Transfer Printing | Hydrographic pattern (wood, marble, camo, custom) | 10,000 units | +5–10 days (film setup) | Lifestyle brands, promotional items |
| Bamboo | Natural bamboo collar or cap component | 10,000 units | +7–14 days (natural material variability) | Eco / sustainable brands, green positioning |
Other Customization Parameters
Color: Any Pantone color in PP resin. Color matching requires 500g masterbatch trial; typical lead time add: 3–5 days. Our WP-1244 colorful trigger sprayer demonstrates multi-color SKU flexibility.
Spray Output Volume: Standard actuation output is 0.8–1.2 ml per stroke. We can tool custom nozzle inserts for 0.3 ml (fine mist, cosmetics) or up to 2.0 ml (heavy-duty cleaning) outputs. Custom nozzle tooling fee: typically $800–1,500 USD amortized over order volume.
Dip Tube Length: Matched to bottle height. Provide bottle interior depth spec; we cut and heat-form dip tubes to ±2mm tolerance.
Branding: Hot-stamping and screen printing on shroud, 1–3 colors. Pad printing on nozzle head (single color). Minimum branding setup: 10,000 units.
OEM/ODM: Full tooling ownership available for orders >50,000 units per run. Tooling amortization typically covered within 2–3 production runs at standard pricing.
Manufacturing Process: How a Trigger Sprayer Is Made
Understanding the manufacturing process helps buyers evaluate supplier capability claims and ask the right questions during factory audits.
Stage 1: Resin Incoming Inspection
PP resin pellets arrive in 25 kg bags. Incoming QC checks: MFI (melt flow index) against spec sheet ±10%, moisture content <0.02% (excess moisture causes splay defects on molded parts), and colorimetric check if colored masterbatch is included.
Stage 2: Injection Molding
Each component (trigger, piston, cylinder, shroud, nozzle cap) is molded separately on dedicated tools. Key process parameters:
- Barrel temperature: 200–230°C for PP
- Mold temperature: 20–40°C (water-cooled)
- Cycle time per shot: 18–35 seconds depending on part complexity
- Dimensional check: first-article inspection (FAI) per lot using digital calipers to 0.01mm
Stage 3: Spring & Ball Valve Assembly
Stainless steel springs and polypropylene ball valves are inserted manually or via semi-automated jigs. Spring force specification determines actuation load (typically 3–6 N for consumer-grade products). Heavy-duty industrial sprayers (WP-1239 “strong trigger”) use heavier springs rated at 8–12 N.
Stage 4: Automated Assembly & Function Test
Complete units are assembled on rotary assembly lines at rates of 60–120 units per minute for standard models. Each unit passes an automated leak test: pressurized to 0.3 MPa for 5 seconds; any unit that fails the seal check is auto-rejected before packaging.
Stage 5: Closure & Finishing
Finished units receive their closure finish (UV coating, aluminum sleeve, water transfer, or bamboo collar) in dedicated post-processing stations. UV-coated units cure under UV lamps at 800–1200 mJ/cm².
Stage 6: Final QC & Packaging
AQL 2.5 sampling inspection: spray pattern check, actuation force measurement, thread engagement test, and visual defect classification (critical / major / minor). Units are packed in PE bags, then master cartons, with packing list and COA (Certificate of Analysis) included per shipment.
Quality Control Standards & What to Verify
Quality claims in trigger sprayer catalogs are often vague. Here is a framework for what to verify—and the specific tests that matter.
Key Tests and Acceptable Limits
| Test | Method | Acceptable Result | Why It Matters |
|---|---|---|---|
| Leak test | Pressurize to 0.3 MPa, 5 seconds | Zero leakage at threads or nozzle | Leaking product damages brand and causes safety issues (bleach, disinfectant) |
| Actuation cycle life | Automated cycler: 10,000 actuations | No cracking, no flow reduction >10% | Consumer-use products may see 5,000+ lifetime strokes |
| Drop test | Filled bottle dropped 1.2m onto concrete (3 faces) | No breakage, no leakage | Retail shelf and logistics handling standard |
| Chemical compatibility | 72-hour immersion in customer formulation at 40°C | Mass change <0.5%, no visual degradation | Especially critical for alcohols, surfactants, essential oils |
| Spray output consistency | 10 actuations, weigh output | CV (coefficient of variation) <5% | Inconsistent output = consumer complaints, over/under dosing |
| Non-spill performance | Invert filled bottle for 60 seconds | Zero liquid loss | Required for salon, travel, e-commerce (orientation unknown in transit) |
| Thread engagement torque | Torque wrench, apply 1.5 Nm | No cross-threading; no loosening under vibration | Loose closure = leakage in distribution |
Certifications to Request
- ISO 9001:2015 — confirms documented QMS; ask for certificate with valid date and scope covering plastic components manufacturing
- FDA 21 CFR 177.1520 — required for US market products contacting food or personal care contents
- REACH SVHC — required for EU distribution; confirms no restricted substances above 0.1% w/w
- RoHS — relevant if electronic actuation (e.g., battery-powered spray—outside scope of manual trigger sprayers but common confusion)
How to Evaluate a Trigger Sprayer Supplier: A Practical Checklist
The cosmetic and cleaning packaging supply market has thousands of trigger sprayer manufacturers, primarily concentrated in Zhejiang and Guangdong provinces in China. Separating capable manufacturers from trading companies or catalog-only resellers requires structured due diligence.
Supplier Evaluation Framework
| Evaluation Area | What to Ask / Check | SUNSHINE Data (benchmark) |
|---|---|---|
| Manufacturing ownership | Do they own injection molding machines? Ask for factory photos with machine brand/model visible. | In-house injection molding and assembly; Ningbo facility |
| Mold ownership | Who owns the tooling? Is tooling cost quoted separately? | Own molds for standard range; OEM mold ownership transferable at >50k units |
| Monthly capacity | Ask for maximum throughput per SKU, not aggregate. Verify with production schedule sample. | 50,000–2,000,000 units/month by SKU (WP-880: 2M/month; WP-1244: 50k/month) |
| Minimum order quantity | Is MOQ per SKU or per order? Any flexibility for first trial orders? | 10,000 units standard; 20,000 for custom PP/PE strong trigger (WP-1239) |
| Lead time transparency | Is quoted lead time from order confirmation or from receipt of deposit? | 20–30 days from order confirmation + deposit receipt |
| Sample availability | Can they supply pre-production samples matching final spec? At what cost? | Samples available; contact for current sample policy and lead time |
| QC documentation | Request COA template, AQL sampling plan, and one historical inspection report | AQL 2.5 outgoing inspection; COA included per shipment |
| Export experience | Ask for 2–3 reference clients in your target market (US, EU, AU) with contact consent | Active export to US, EU, Middle East; B2B clients in salon, cleaning, garden sectors |
| Communication responsiveness | Response time to RFQ <24 hours is a positive signal. Slow response predicts production delays. | Direct engineering contact; English-language technical support |
Red Flags That Disqualify a Supplier
- Cannot provide ISO 9001 certificate with current validity date
- Refuses to share resin supplier name or material spec sheet
- Quotes identical MOQ for every SKU regardless of complexity (suggests catalog reseller)
- Lead times longer than 45 days for standard PP trigger sprayers (stock tooling items)
- No pre-production sample option before full order commitment
Pricing, MOQ & Lead Times: What to Expect in 2025–2026
Trigger sprayer pricing is volume-sensitive, material-sensitive, and customization-sensitive. The following ranges are based on our active production pricing as of Q2 2026. USD pricing for FOB Ningbo.
| Product Category | MOQ | Lead Time | Monthly Capacity | Indicative Price Range (FOB) |
|---|---|---|---|---|
| Standard 28/410 PP trigger sprayer head | 10,000 units | 20 days | 100,000 units/month | $0.18–0.28 / unit |
| Fine mist hair care sprayer (24/410–28/412) | 10,000 units | 25 days | 100,000 units/month | $0.22–0.35 / unit |
| Mini trigger sprayer 28/410 | 10,000 units | 20–25 days | 500,000 units/month | $0.15–0.25 / unit |
| Continuous spray bottle (200ml + head) | 10,000 units | 25 days | 1,000,000 units/month | $0.45–0.75 / set |
| Custom PP/PE strong trigger (28/410) | 20,000 units | 30 days | 500,000 units/month | $0.25–0.38 / unit |
| B2B precision spray nozzle (24/410, PP+PET) | 10,000 units | 30 days | 2,000,000 units/month | $0.20–0.32 / unit |
Note: Prices above are indicative ranges only. Final pricing depends on Pantone color, closure finish, order quantity, and prevailing PP resin spot price. Request a formal quotation with your exact specification for binding pricing.
Payment Terms
Standard terms: 30% T/T deposit on order confirmation, 70% T/T against Bill of Lading (B/L) copy before shipment. For established accounts (>3 completed orders), 30-day net terms may be negotiable. agreements are governed by a standard Sales Contract with specifications, delivery terms, and inspection rights attached.
Volume Pricing Logic
The price break structure for most trigger sprayer SKUs:
- 10,000–49,999 units: base price
- 50,000–99,999 units: −5 to −8%
- 100,000+ units: −10 to −15% (negotiation-based)
- 500,000+ units/month: strategic pricing discussion with dedicated account manager
Common Problems & How to Prevent Them
Problem 1: Sprayer Drips After Actuation
Root cause: Ball valve seat not sealing cleanly. Usually occurs when the valve seat has a dimensional defect (>0.05mm deviation) or when liquid viscosity is too high for the valve return spring to close properly against it.
Prevention: Request a post-actuation drip test in your pre-production sample approval—fill with your actual formulation at 25°C, actuate 10 times, then observe the nozzle for 30 seconds. Zero drip is the acceptable standard. For high-viscosity liquids (>500 cP), specify a spring with higher return force or switch to a diaphragm-valve design.
Problem 2: Inconsistent Spray Output Between Units
Root cause: Nozzle orifice diameter variation across a production lot. If the supplier’s mold is worn (>500,000 shots without refurbishment), the orifice insert cavity develops flash that narrows the effective diameter inconsistently.
Prevention: Specify nozzle orifice tolerance in your purchase contract (e.g., 0.50mm ±0.03mm). Request nozzle output consistency data—10-unit average with CV% disclosed—as part of COA. Any CV >7% should trigger a lot hold and re-inspection.
Problem 3: Thread Cross-Threading or Loosening in Use
Root cause: Thread pitch mismatch between sprayer and bottle, or inadequate torque applied at the assembly plant. A 28/410 sprayer applied to a 28/400 bottle will appear to engage but will work loose under vibration or during the first use.
Prevention: Always confirm bottle neck GPI finish code with your bottle supplier before ordering sprayer heads. During incoming goods inspection, apply and remove 10 units by hand—any that resist smooth engagement or feel loose at 0.5 Nm tightening torque should trigger a lot inspection. For high-value or high-spill-risk products, specify a tamper-evident overcap that also adds thread retention.
Problem 4: Spring Corrosion in Alcohol-Based Formulations
Root cause: Standard carbon steel springs corrode in formulations with >30% ethanol or acidic pH. Rust particles then contaminate the product—particularly problematic in cosmetics or sanitizers.
Prevention: Specify 316L stainless steel springs for any alcohol-containing formulation. Confirm with your supplier’s BOM (Bill of Materials) that the spring specified is stainless, not plated carbon steel. Request spring material certification as part of pre-production sample approval.
Problem 5: Trigger Cracking Under High-Frequency Use
Root cause: Stress concentration at trigger hinge pivot point, worsened by use of recycled or off-spec PP with inconsistent impact modifier content.
Prevention: For products targeting high-frequency professional environments (salons, janitorial), specify virgin PP with minimum 5% rubber (EPDM or SBS) impact modifier. Request ISO 180 Izod impact test results for the PP resin grade used. Our WP-1239 “strong trigger” uses PP/PE blend specifically for superior impact resistance in demanding applications.
Frequently Asked Questions
What is the difference between 28/400 and 28/410 trigger sprayers?
Both have a 28mm neck diameter, but different thread profiles. 28/400 uses a 4-start, 0-lead GPI thread; 28/410 uses a 4-start, 10-lead thread. They are not interchangeable—a 28/410 sprayer will not seal properly on a 28/400 bottle. The 28/410 is now the dominant standard globally; if your bottle is unlabeled, measure the thread pitch to confirm.
What is the minimum order for a custom color trigger sprayer?
10,000 units, same as standard. Color masterbatch is blended into the PP resin before molding; the additional cost is absorbed into pricing at this quantity. For rare or brand-specific Pantone colors, a 500g trial batch may be requested to confirm color match before full production.
Can trigger sprayers be shipped by air freight?
Yes—trigger sprayers are non-pressurized and non-hazardous. They ship as standard dry goods by air (IATA Class none required) or ocean (FCL/LCL). For air, ensure bottles are shipped separately or that assembled sprayers are capped to prevent accidental actuation in transit. Customs HS code for plastic trigger sprayers: typically 8424.20 or 8424.89 depending on classification authority—confirm with your freight forwarder.
How do I get product samples before committing to a full order?
Contact SUNSHINE directly via the product page or the inquiry form at sunshine-lotionpump.com. Pre-production samples are available for most standard SKUs. Lead time for samples: 5–10 business days. Samples are provided for evaluation; shipping cost is buyer’s account at this stage.
What documentation is provided with a production order?
Standard documents per shipment: Commercial Invoice, Packing List, Certificate of Analysis (COA), and Bill of Lading. On request: ISO 9001 certification copy, material safety data (resin certificates), and REACH SVHC declaration. FDA food-contact compliance letters are available for PP grades used in our personal care and hair-care sprayer lines.
Can you source bottles and sprayers together as a complete package?
Yes. We offer sprayer heads matched to standard HDPE, PET, and PP bottles. Complete bottle + sprayer sets are quoted as assembled kits; see WP-1172 (200ml spray bottle + continuous mist trigger) as a reference. Custom bottle + sprayer combinations require design consultation; tooling costs apply for non-standard bottle profiles.
Conclusion: Three Steps to a Successful Trigger Sprayer Sourcing Project
- Specify before you quote. Thread size (24/410 vs. 28/410 vs. 28/412), spray pattern (fine mist / stream / continuous), material (PP / PP/PE), closure finish (smooth / ribbed / aluminum / UV / water transfer / bamboo), and your liquid formulation. Vague specs produce vague quotes and mismatched samples.
- Sample with your actual formulation. Run the chemical compatibility immersion test and actuation cycle test with the liquid you intend to fill. A sprayer that performs perfectly with water may drip or corrode with an alcohol-based sanitizer.
- Confirm capacity before peak-season orders. Monthly capacity varies by SKU: our B2B precision nozzle (WP-880) runs at 2,000,000 units/month; our colorful cleaning sprayer (WP-1244) at 50,000/month. Match your order size and timing to the production line’s available capacity—especially for Q4 peak demand.
Ready to source? Contact SUNSHINE with your specification or browse the full trigger sprayer catalog for current availability and pricing.
About the Manufacturer: Ningbo Shaoshuai Plastic Industry Co., Ltd. (Brand: SUNSHINE) is a professional cosmetic pump and spray hardware manufacturer headquartered in Ningbo, Zhejiang, China. Product range: Trigger sprayers, fine mist sprayers, lotion pumps, foam pumps, disc caps, and oil pumps. Sizes: 24/410, 28/410, and 28/412 neck finishes. Materials: PP, PP/PE, PET, Plastic & Metal, Plastic with UV coating. Monthly capacity: Up to 2,000,000 units/month on high-volume lines. Standard MOQ: 10,000 units (20,000 units for custom PP/PE blends). Lead time: 20–30 days from confirmed order + deposit. Payment: 30% T/T deposit; 70% T/T against B/L. Export markets: North America, Europe, Middle East. Customization: OEM/ODM available; 6 closure finish types; Pantone color matching. Quality: ISO 9001-compliant QMS; AQL 2.5 outgoing inspection; COA per shipment. Catalog: 68 SKUs across cosmetic pump categories. Website: sunshine-lotionpump.com
Request Your Factory-Direct Quote
Share your requirements — pump type, size, volume and quantity. We'll respond within 24 hours with factory pricing and a sample recommendation.
- ✓ Quality issues? We remake for free
- ✓ Late delivery? 5% discount on next order
- ✓ Not satisfied? We resolve it — no excuses
- ✓ Customer satisfaction is our priority